Heart
Open files · CC BY 4.0
Print the case for your tag.
Fridge magnets, keychains and the embed module that lets you put the tag into any design of your own. All in STL and 3MF, already oriented for the bed, no supports.
Ready-to-print shapes
22 shapes published on MakerWorld, free and under CC BY 4.0. Each one comes as a fridge magnet, keychain, wall mount and tape mount for all four tags (Gicisky 2.1", PANDA 2.13", Gicisky 2.9" and WOLINK 2.9"), with the print profile already set up. The same files are in the catalog below for direct download.
Airplane
Trailer
Cloud
Club
Sword
Ghost
Bone
Camera
Key
Shopping bag
Padlock
Mountains
House
Poop
UFO
Oval plaque
Motorhome
Pumpkin
Tombstone
Bat
Cauldron
How it works
Pick your tag and a shape
Each file is made for one tag model. The name tells you which: gicisky_2.1_heart_magnet.stl.
Print with the profile below
Front face on the bed, 3 walls, no supports. Fits any 180 mm printer.
Snap the tag in from the front
It locks on the teeth and sits flush with the part. To change the battery, it comes out the same way.
Compatible tags
Validated in print
Gicisky 2.1" BWR · Bluetooth LE
- Screen 250 × 122 px, black, white and red
- Size 70 × 34.7 × 13.6 mm, 2 × CR2450 coin cells
- In the app open protocol, activatable on Android
- Certifications the manufacturer states FCC, CE and RoHS, with no certificate number (Hi-Link website, checked on 13 Sep 2026)
Exact AliExpress listing Arc Link (free shipping to Brazil)
Arc Link Devices Store is an independent seller, not the official store. It sells the 2.1" and the 2.9" in the same listing (variant "2.1 Inch"), with free shipping to Brazil; we have checked its 2.9", not yet its 2.1".
Pick the single-tag variant "2.13inch BLE ink screen". The base-station version does not work with the app.
Works with the app
PANDA 2.13" BWR · Bluetooth LE
- Screen 250 × 122 px, black, white and red
- Size 71.3 × 34.8 × 12.3 mm, 2 × CR2450 coin cells with a cover
- In the app open protocol, activatable on Android
AliExpress listing WirelessLinkx (pair of 2.13", free shipping to Brazil)
WirelessLinkx Store sells the same tag under a generic name (variant "2pcs 2.13inch ESL", Bluetooth), with free shipping to Brazil: checked on 2026-09-29 with two units, recognised and written by the app. The listing has other sizes; for now only the 2.13" works (the 2.9" is being tested).
Pick the Bluetooth (app) version, not the base-station or NFC-only one. The maker is phasing this line out: stock may run out.
Validated in print · 4 colours
Gicisky 2.9" BWRY · Bluetooth LE
- Screen 296 × 128 px, black, white, red and yellow
- Size 88.5 × 41.6 × 13.8 mm, 2 × CR2450 coin cells
- In the app open protocol, activatable on Android
Arc Link (free shipping to Brazil)
Independent seller (Arc Link Devices Store), not the official store. Checked on 2026-10-02: recognised and written by the app in all 4 colours.
In the listing, pick the 2.9" variant (the same listing sells the 2.1"). The catalogue has cases made for the 2.9" (fit validated in print on 2026-10-02).
Validated in print · the thinnest
WOLINK 2.9" BWR · Bluetooth LE
- Screen 296 × 128 px, black, white and red
- Size 90 × 41.8 × 9.3 mm, CR2450 coin cells behind a lid
- In the app open protocol, activatable on Android (since version 1.26.10-74)
WirelessLinkx (free shipping to Brazil)
Sold in pairs under a generic shelf-label name, by the same seller as the PANDA. Maker: Zhsunyco (WOLINK). Checked on 2026-10-14: recognised and written by the app.
In the listing, pick the "2pcs 2.9inch ESL" variant (the same listing sells the 2.13" pair). The catalogue has cases made for the WOLINK (fit validated in print on 2026-10-30).
Notice
Pingente does not sell hardware, only the app. The tag comes from an independent manufacturer and you buy it wherever you like. Warranty is the seller's, and checking whether the tag is approved for use in your country is up to the buyer.
Neodymium magnets are dangerous if swallowed: the magnet part is not a toy and must be kept away from small children and pets.
Print profile
The same for every part in the catalog. The first layer is the face people see, so it picks up the texture of your plate.
- Nozzle
- 0.4 mm
- Layer height
- 0.2 mm
- Walls
- 3
- Top and bottom layers
- 5 + 5
- Infill
- 15% · grid or gyroid
- Supports
- none
- Orientation
- front face down (the file already comes that way)
- Material
- PLA for magnets · PETG or PLA+ for keychains
Three walls because only about 3.5 mm is left between the tag pocket and the edge: with fewer, that area prints hollow. Five top and bottom layers because the front is what shows and the floor of the magnet recess has to be solid. The infill pattern does not matter, the section is nearly all perimeter.
Besides filament
- Magnet: 2 neodymium magnets ∅10 × 3 mm, glued into the recesses on the back.
- Keychain and luggage tag: 2 mm paracord as a folded loop, 4 mm with a knot, or a 20–25 mm metal ring. Paracord ends melt and do not fray.
In your slicer
Start from your printer's standard 0.20 mm profile and change only this.
Bambu Studio and OrcaSlicer
- Quality → Layer height: 0.2.
- Strength → Wall loops: 3 · Top shell layers: 5 · Bottom shell layers: 5.
- Strength → Sparse infill density: 15%.
- Support → Enable support: off.
- Do not rotate the part: it already loads front face down. A textured (PEI) plate gives the front its best finish.
PrusaSlicer
- Layers and perimeters → Layer height: 0.2 · Perimeters: 3.
- Layers and perimeters → Solid layers: top 5, bottom 5.
- Infill → Fill density: 15%.
- Support material → Generate support material: off.
Cura
- Quality → Layer Height: 0.2.
- Walls → Wall Line Count: 3.
- Top/Bottom → Top Layers: 5 · Bottom Layers: 5.
- Infill → Infill Density: 15% · Support → Generate Support: off.
Embed module: the tag in your own design
The module is just the tag's socket, a block of its exact size. It ships with the negative, the envelope you subtract from your model to open the cavity.
- Open your model in the slicer. Right-click it → Add negative part (Bambu Studio, OrcaSlicer) or Add negative volume (PrusaSlicer) → Load → pick the _negativo.stl file.
- Move the negative to where the tag should sit, with its top face flush with the front of your part.
- Right-click again → Add part → Load → the module for the same tag. It lands exactly where the negative is, both have the same volume.
- Slice with the profile above. Your part has to be at least as thick as the tag.
Embed module
Embed module for wood
Catalog
Only what has been printed and tested with the real tag gets listed here.
License and notice
The files are CC BY 4.0: print them, remix them and sell the printed parts, crediting pingente.app. Pingente does not sell hardware, only the app. You buy the tag wherever you like, and its compliance with your country's rules is up to whoever buys and resells it.